Replacement High Pressure Cast Aluminum Industrial Burner with diameter 150mm
Product Description
-
Common Replacement Burner;
-
Construced with Pressure Cast Aluminum;
-
Application for Gas Camp Stove;
-
Heat Resistant;
-
Material:Aluminum Alloy ADC12;
-
Easy Installation;
-
Best Priced Industrial Aluminum Burner;
-
Burner Head Size: 150mm;
-
Use it with Low or high Pressure Regulators.
Die Cast Aluminum Alloy ADC12
Replacement High Pressure Cast Aluminum Industrial Burner with diameter 150mm
Chemical Composites:(%)
| Silicon (Si): | 9.6-12.0 |
| Iron(Fe): | 1.3 |
| Copper(Cu): | 1.5-3.5 |
| Managanese(Mn): | 0.5 |
| Magnesium(Mg): | 0.3 |
| Nickel(Ni): | 0.5 |
| Zinc(Zn): | 1 |
| Aluminum(Al): | Remainder |
| Resistance to Corrosion: | 3 |
| Anodizing: | 3 |
(1 = most desirable, 5 = least desirable)
Aluminum Die Casting Processing
Replacement High Pressure Cast Aluminum Industrial Burner with diameter 150mm
| Siz Range | Not normally over 2.7feet square |
| Parts Weight | 0.01pounds to 14 pounds |
| Setup Cost | New die casting tooling is free |
| Tolerances | 0.02inch,add0.01inch to 0.015inch across parting line up to part size |
| Die Casting Finish | 32~63 RMS |
| Minium Draft | normally 1° |
| Billet | normally 0.04inch |
| Normal Minimum Section Thickness | 0.060inch for small parts; 0.090inch for medium parts |
| Ordering Quantity | For first trial order: not less than 100pcs; Usually 1,000pcs or more. |
| Normal Leadtime | Tooling: 4~12 weeks update part size; Samples: one week if no finish and CNC machining required; Production:2~3weeks |
FAQ
Replacement High Pressure Cast Aluminum Industrial Burner with diameter 150mm
1. Are you a trade company or factory?
We are a factory.
2. What can you do?
We can offer one stop solution on pressure die casting from tooling, casting, machining, finishing to packing.
3.How many years for your company estimated?
15years since 2004 established.
4. How about your prices?
Our prices are more competitive by all in house service.
How to custom Other Size Industrial Alumium Burner?
- Customers send the IGS/STEP drawings or sample to us for offer;
- Will talk about the details to meet castabilities;
- After customer`s acceptance on our prices, we will send our 3D molding drawing for approval;
- After approving the 3D molding drawing, we will start the production of the tooling/mold after the deposit of mold/tooling cost paid;
- After mold/tooling finished, will send the samples for customer`s check;
- After samples approved, will prepare the production on trial order after customer`s payment for the balance for the mold/tooling cost.
Product Tags:
|
|
High Pressure Custom Aluminum Parts Cast Aluminum Industrial Burner With Diameter 150mm Images
|
